Skip to main content
    • by 
    •   5  
      System DynamicsManufacturing EngineeringHigh Speed MachiningMachine
The effect of the radial rotor surface grooves on rotor losses, in the case of a 3-phase, 4-pole, 24000 rpm, axially slitted solid rotor induction motor has been studied numerically and experimentally. The study shows that through radial... more
    • by  and +1
    •   10  
      High FrequencyFinite Element AnalysisHigh Speed MachiningConductivity
In this paper high speed turning and milling models are considered and chip formation and cutting forces are investigated. For the simulation the Finite Element Modeling software Third Wave Systems AdvantEdge is employed and the cutting... more
    • by 
    •   5  
      Finite Element Analysis (Engineering)High Speed MachiningTurningMilling
    • by 
    •   9  
      Mechanical EngineeringRapid PrototypingHigh Speed MachiningInjection Molding
    • by  and +1
    •   13  
      Machine LearningSurface RoughnessMathematical SciencesHigh Speed Machining
    • by 
    •   13  
      EngineeringComputer ScienceCopperIEEE
    • by 
    •   12  
      Mechanical EngineeringCivil EngineeringStrain RateManufacturing Engineering
    • by  and +1
    •   10  
      Materials EngineeringMechanical EngineeringCase StudyManufacturing Engineering
    • by 
    •   8  
      TitaniumExperimental DesignMachine ToolsManufacturing Engineering
    • by 
    •   10  
      GeophysicsMultidisciplinarySeismic WavesHigher Order Thinking
    • by 
    •   13  
      Mechanical EngineeringAutomotive IndustryGeometric modelManufacturing Engineering
    • by 
    •   9  
      Mechanical EngineeringCivil EngineeringImpulse responseHigh Speed Machining
    • by 
    •   6  
      Environmental EngineeringMechanical EngineeringManufacturing EngineeringHigh Speed Machining
    • by 
    •   8  
      Manufacturing EngineeringHigh Speed MachiningResearch and DevelopmentHigh Temperature
The Research paper entitled above gives trace on Simulation Model for Teaching and Learning. This is the important area in which the teaching and learning can be benefited. The teaching methods involve three types of methods like... more
    • by 
    • High Speed Machining
The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and... more
    • by 
    •   20  
      ConstructionControl SystemsControl systemNatural Gas
    • by 
    •   7  
      EngineeringTechnologyHigh Speed MachiningPhysical sciences
ABSTRAK Umur pahat merupakan suatu data permesinan yang sangat penting dalam perencanaan permesinan. Setiap perusahaan yang bergerak dibidang manufaktur pasti mempunyai batas tertentu untuk umur pahat optimal agar perencanaan pemesinan... more
    • by 
    • High Speed Machining
    • by 
    •   12  
      ProductivityManufacturing EngineeringHigh Speed MachiningDrilling
    • by  and +1
    •   6  
      Manufacturing EngineeringHigh Speed MachiningDimensionalHigh Speed
    • by 
    •   9  
      Materials EngineeringMechanical EngineeringWearTool wear
Despite the large number of abrasive waterjet machining (AWJM) models developed so far, there still has been confusion about the nature by which workpiece surfaces are eroded. The finite element method (FEM) could provide both qualitative... more
    • by 
    •   32  
      Non Traditional MachiningElectrical Discharge MachiningApplied Waterjet TechnologyMachining
    • by 
    •   4  
      TitaniumHigh Speed MachiningMaterials DesignWear resistance
Abstract: Pythagorean--hodograph (PH) curves admit the formulation ofreal--time CNC interpolators that are extremely accurate, flexible,and robust. Motivated by the practical benefits of these algorithmsin high--speed machining... more
    • by 
    •   5  
      The history of mathematicsHigh Speed MachiningPiecewise LinearHigh Speed
    • by  and +2
    •   4  
      High speed machining of titaniumFinite Element Analysis (FEA)3d ModellingHigh Speed Machining
    • by 
    •   6  
      Mechanical EngineeringOptimizationMechanical Engineering DesignHigh Speed Machining
Tool condition monitoring, mainly tool breakage detection for high-speed machining (HSM), is an important problem to solve; however, the techniques or types of sensors applied in other research projects present certain inconveniences. In... more
    • by 
    •   10  
      EngineeringCondition MonitoringMathematical SciencesWavelet Transform
    • by 
    •   8  
      Mechanical EngineeringComputer Aided DesignHigh Speed MachiningComposite Material
Abstract: This paper deals with simulation models allowing predictions of the surface finish and the actual velocity during machining. To simulate material removal in 5-axis machining, we propose an N-buffer based model integrating the... more
    • by  and +1
    • High Speed Machining
    • by 
    •   11  
      Materials EngineeringCondensed Matter PhysicsHigh Speed MachiningCVD
    • by  and +1
    •   9  
      EngineeringStructural DesignMathematical SciencesHigh Speed Machining
Abstract The present paper outlines an experimental study to investigate the effects of cutting parameters on finish and power consumption by employing Taguchi techniques. The high speed machining of AISI 1045 using coated carbide tools... more
    • by 
    •   12  
      PRODUCTION ENGINEERINGSurface RoughnessManufacturing EngineeringHigh Speed Machining
High speed machining has been made possible but its complete utilization is at stake because for the lack of proper lubricant and/or coolant that would help in quick transfer of heat and safe guard the component from thermo-mechanical... more
    • by 
    •   20  
      CryogenicsHeat TransferMachiningGrinding
    • by 
    •   5  
      Materials EngineeringCondensed Matter PhysicsHigh Speed MachiningMagnetron Sputtering
    • by 
    •   3  
      Manufacturing EngineeringHigh Speed MachiningMagnetron Sputtering
An original method for measuring dynamic forces using a commercial piezoelectric dynamometer is presented. This approach is based on the construction of a correction function taking into account the dynamic behavior of the mechanical... more
    • by 
    •   7  
      Modal AnalysisManufacturing EngineeringHigh Speed MachiningMachine
This paper describes the experimental procedure to identify the predominant frequencies of the high speed testing machine by conducting modal analysis. The effects due to the predominant frequencies of the system and loading rate on the... more
    • by 
    •   14  
      Mechanical EngineeringCivil EngineeringExperimental MechanicsModal Analysis
    • by  and +1
    •   13  
      EngineeringModeling and SimulationMathematical SciencesHigh Speed Machining
    • by 
    •   14  
      Materials EngineeringCondensed Matter PhysicsSliding wearHigh Speed Machining
The paper reports the findings of the experimental work to study the impact of machining parameters, particularly cutting speed, feed rate, and axial depth of cut towards cutting tool life and machined surface roughness in high-speed... more
    • by 
    •   2  
      High Speed Machining7075 Aluminum Alloy
    • by 
    •   14  
      Materials ScienceProductivityMachiningSurface Roughness
    • by 
    •   20  
      ConstructionControl SystemsControl systemNatural Gas
    • by  and +1
    •   10  
      Condition MonitoringCase StudyTool wearHigh Speed Machining
    • by 
    •   5  
      EngineeringMathematical SciencesHigh Speed MachiningAdvanced manufacturing technology
Purpose: The aim of this research is to make a first experimental analysis of the effect of the cutting speed on the chip morphology, and of the cutting forces in the orthogonal turning process of the titanium alloys Ti-6Al-4V.... more
    • by 
    •   12  
      TitaniumAutomotive IndustryShear bandsHigh Speed Machining
    • by 
    •   9  
      Applied MathematicsHigh FrequencyHigh Speed MachiningMathematical Model
    • by 
    •   11  
      ModelingDynamicsKinematicsHigh Speed Machining
    • by 
    •   11  
      Mechanical EngineeringCivil EngineeringNumerical ModellingManufacturing Engineering