Chemical Engineering

Plant extracts are increasingly becoming important additives in food industry due to their antimicrobial and antioxidant abilities that delay the development of off-flavors and improve the color stability in ready-to-eat (RTE) meat products. Due to their natural origin, they are excellent candidates to replace synthetic molecules, which are generally considered to have toxicological and carcinogenic effects. The efficient extraction of these antioxidant molecules from their natural sources, along with the determination of their activity in the commercialized products, have been a great challenge for researchers and food chain contributors. The objective of this review is to highlight the application of plant extracts to improve the shelf-life, nutritional and health-related properties of RTE meat products. The sensory effects of these extracts on RTE meat products as well as the possible synergistic effects of a combination of extracts are discussed.

Over a course of centuries, various food processing technologies have been explored and implemented to provide safe, fresher-tasting and nutritive food products. Among these technologies, application of emerging food processes (e.g., cold plasma, pressurized fluids, pulsed electric fields, ohmic heating, radiofrequency electric fields, ultrasonics and megasonics, high hydrostatic pressure, high pressure homogenization, hyperbaric storage, and negative pressure cavitation extraction) have attracted much attention in the past decades. This is because, compared to their conventional counterparts, novel food processes allow a significant reduction in the overall processing times with savings in energy consumption, while ensuring food safety, and ample benefits for the industry. Noteworthily, industry and university teams have made extensive efforts for the development of novel technologies, with sound scientific knowledge of their effects on different food materials. The main objective ...

Oxide diffusion was studied in two innovative SOFC cathode materials, Ba2Co9O14 and Ca3Co4O9+δ derivatives. Although oxygen diffusion was confirmed in the promising material Ba2Co9O14, it was not possible to derive accurate transport parameters because of an oxidation process at the sample surface which has still to be clarified. In contrast, oxygen diffusion in the well-known Ca3Co4O9+δ thermoelectric material was improved when calcium was partly substituted with strontium, likely due to an increase of the volume of the rock salt layers in which the conduction process takes place. Although the diffusion coefficient remains low, interestingly, fast kinetics towards the oxygen molecule dissociation reaction were shown with surface exchange coefficients higher than those reported for the best cathode materials in the field. They increased with the strontium content; the Sr atoms potentially play a key role in the mechanism of oxygen molecule dissociation at the solid surface.

Synthesizing metal oxides through the sol–gel process provides a convenient way for forming a nanostructured layer in wide band gap semiconductors. In this paper, a unique method of introducing dopants into the metal oxide semiconductor is presented. The doped TiO2 is prepared by adding a Cs2CO3 solution to a nanocrystalline TiO2 solution that is synthesized via a non‐hydrolytic sol–gel process. The properties of the TiO2:Cs layer are investigated and the results show stable nanostructure morphology. In addition to providing morphological stability, Cs in TiO2 also gives rise to a more desirable work function for charge transport in organic electronics. Polymer solar cells based on the poly(3‐hexylthiophene) (P3HT): methanofullerene (PC70BM) system with the addition of a TiO2:Cs interfacial layer exhibit excellent characteristics with a power conversion efficiency of up to 4.2%. The improved device performance is attributed to an improved polymer/metal contact, more efficient electr...

In this work, magnetic graphene oxide nanocomposites were synthesized by co-precipitation method and used as an adsorbent for removal of arsenic (V) ions from water. The structure and morphology of magnetic graphene oxide nanocomposites were studied by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, Brunauer–Emmett–Teller specific surface area, and vibrating sample magnetometry. Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy results of magnetic graphene oxide presented that the Fe3O4 nanoparticles in the size range of 10–25 nm were decorated on graphene oxide nanosheets. The adsorption properties of magnetic graphene oxide nanocomposites for arsenic (V) from water were investigated to study the effects of magnetic graphene oxide mass ratio, contact time, pH, and initial concentration. The suitable magnetic graphene oxide mass ratio of nanocomposites for arsenic (V) adsorption was determin...

High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this s...

Metal particles supported on oxide surfaces are used as catalysts for a wide variety of processes in the chemical and energy conversion industries. For catalytic applications, metal particles are generally formed on an oxide support by physical or chemical deposition, or less commonly by exsolution from it. Although fundamentally different, both methods might be assumed to produce morphologically and functionally similar particles. Here we show that unlike nickel particles deposited on perovskite oxides, exsolved analogues are socketed into the parent perovskite, leading to enhanced stability and a significant decrease in the propensity for hydrocarbon coking, indicative of a stronger metal-oxide interface. In addition, we reveal key surface effects and defect interactions critical for future design of exsolution-based perovskite materials for catalytic and other functionalities. This study provides a new dimension for tailoring particle-substrate interactions in the context of incr...